Wilwood Caliper-TX6R- L/H - Clear 1.75/1.62/1.62in Pistons 1.38in Disc
Wilwood Combination Parking Brake Rear Kit 12.19in Drilled Red 2006-Up Civic / CRZ
Wilwood Narrow Superlite 6R Dust Seal Front Hub Kit 14.00in Drill Red 67-69 Camaro 64-72 Nova
Wilwood GS Remote Master Cylinder - .625in Bore
Wilwood Forged Dynalite Front Hat Kit 12.19in Drilled Red 02-06 Acura RSX-5 Lug
Wilwood Rotor-GT60 SPC-37-LH-BLK 16.00 x 1.38 - 12 on 10.75in
Wilwood Caliper-Aero4-R/H - Black 1.62/1.38in Pistons 1.25in Disc
Wilwood Residual Pressure Valve - New Style - 2# / Blue
Wilwood Combination Parking Brake Rear Kit 11.00in Drilled Red Civic / Integra Disc 2.39 Hub Offset
Wilwood Axle Bearing Retainer Chevy Special P-Brake
Wilwood Rotor-UL32 Vented Iron-Drilled 11.75 x .810 - 8 on 7.00in
Wilwood Forged Dynalite P/S Park Brake Kit Drilled 12 Bolt 2.75in offset Staggered Shock
Wilwood Dynapro Low-Profile 11.00in P-Brake Kit Drill-Red New Big Ford 2.50in Offset
Wilwood Caliper-Dynapro Single 3.75in Mount 1.75in Pistons .38in Disc
Wilwood Rotor-HD36 SPC-37 -LH 12.19 x .810 - 8 on 7.00in
Wilwood Flexline Kit Civic 2006-up Front
Wilwood Fitting Adaptor -3 to 3/8-24 I.F.
Wilwood Caliper-Forged Superlite 1.75in Pistons 1.10in Disc
Wilwood Rotor-Steel-SSF Front 12.90 x .380 - 12 on 8.75in
Wilwood Caliper-Forged Superlite 1.12in Pistons .81in Disc
Wilwood Dynapro 6 Front Hat Kit 12.19in Drilled 94-01 Honda/Acura w/262mm Disc
Wilwood Caliper-Forged Narrow Superlite 6R-L/H 1.75/1.25in/1.25in Pistons 1.25in Rotor - Red
Wilwood Rotor-HD36 SPC-37 -RH 12.19 x .810 - 8 on 7.00in
Wilwood Short Remote M/C Kit 1-1/8in Bore
Wilwood Pad Set BP-40 7912 Powerlite
$130.76Wilwood Pad Set BP-40 7912 Powerlite
View cart “Wilwood Short Remote M/C Kit 1-1/8in Bore” has been added to your cart.
Showing 385–400 of 904 results
Wilwood Hub Seal
$22.99Wilwood Hub Seal
Wilwood D154 P/S P-B Kit Drilled-Red Chevy 12 Bolt 2.75in Off w/ C-Clips
$1,175.99D154 Pro-Series rear disc kits provides a complete solution for popular muscle car rear axles that require a parking brake. Forged D154 dual piston calipers, 12.19″ one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. D154 rear caliper kits offer a complimentary match to vehicles using Wilwood D52 or D154 calipers on OE spindles. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance.
Wilwood Forged Dynalite Front Kit 11.00in Drill-Red 69-70 Impala Drum/Disc 69-82 Vette
$1,117.86FDL Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditional non-ABS spindle applications on American muscle cars, vintage rods, and heavy weight drag cars. Based on the venerable forged billet Dynalite caliper, these versatile kits are easily optioned to suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast. Most kits require no modifications for installation, and provide plenty of clearance inside popular 15″ wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.
Wilwood Rotor-HD48 SPC-37-LH 12.88 x 1.25 – 12 on 8.75in
$292.71Wilwood’s HD 48 Curved Vane Spec-37 rotors are are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001″ run-out, flatness, and parallelism. Our HD Series preparation includes full detail machining and smooth pad contact faces without slots.
Wilwood DPHA Front Caliper & Rotor Kit Drilled Honda / Acura w/ 262mm OE Rotor – Competition Blue
$693.49Wilwood DPHA Front Caliper & Rotor Kit Drilled Honda / Acura w/ 262mm OE Rotor – Competition Blue
Wilwood Caliper-MC4 Mechanical-L/H – Black w/ Logo 1.19in Piston .81in Disc
$138.08Wilwood’s MC4 Mechanical Parking Brake Caliper is a multi-use, cable operated brake caliper that combines high output performance with simplicity in design and construction, and is the perfect solution for vehicle applications requiring a separate, mechanically actuated parking brake caliper. Built to accept rotors that are .810″ thick, with 11.00″ – 12.88″ diameter range, the MC4 combines an efficient die cast body with a forged billet anvil for superior strength under load, yet is lightweight at only 3.30 (2.95 without pads) pounds. Supplied with each caliper are our Composite Metallic (CM) high-friction, high static-hold brake pads, and are pre-fitted with noise cancelling shields.
Wilwood Pad Set BP-20 7912 Powerlite
$126.50Wilwood Pad Set BP-20 7912 Powerlite
Wilwood Flexline Kit 55-57 Chevy w/ Forged Dynalite Front Caliper
$76.99Wilwood Flexline Kit 55-57 Chevy w/ Forged Dynalite Front Caliper
Wilwood Rotor Bolt Kit – Dynamic Rear 8 Bolt with T-Nuts
$66.99Wilwood’s Dynamic Mount Rotor Bolt kits contain bolts and hardware for dynamic mounting for specific hat or rotor adapters.
Wilwood Rotor-HD36 SPC-37 -LH 11.75 x .810 – 8 on 7.00in
$120.08Wilwood’s HD 36 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001″ run-out, flatness, and parallelism. Our HD Series preparation includes full detail machining and smooth pad contact faces without slots.
Wilwood Dynapro Radial Front Kit 12.19in Drilled Red 99-03 Jetta IV & Golf IV
$1,235.99Radial mounting provides secure and accurate installation of the forged billet DynaPro four piston caliper with large diameter rotors for this group of front and all wheel drive sport compacts. These kits are the perfect compliment to wheel, tire, and suspension upgrades on daily drivers, competition vehicles, and custom styled show machines. Each kit is engineered specific for each vehicle to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs provide choices that enable the builder to personalize the style and optimize brake performance.
Wilwood Forged Dynalite Front Hat Kit 12.19in Drilled Red 02-06 Acura RSX-5 Lug
$918.36Forged billet Dynalite calipers, oversized rotors, and high performance Wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts. These kits are the perfect complement to wheel, tire, and suspension upgrades. Options for caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines. Each kit is engineered specific for each vehicle. They are fully compatible with OE master cylinder output while retaining the full factory ABS functions.
Wilwood Brackets (2) – w/Mounting Kit – SL4R – P-Brake Kit 13in Rotor
$189.27Caliper Bracket Mount kit, Radial mount for FNSL4R series of calipers on 5.98” radial mount centers. Made from high strength aluminum alloy and contains caliper mounting hardware. Designed for use with Wilwood’s Disc/Drum kits and optimized for 13.00” diameter rotor use.
Wilwood Adjustable-Tandem Dual Pedal – Brake / Clutch – Fwd. Swing Mount – 6.25:1 – Black E-Coat
$224.52Wilwood’s new Swing Mount Tandem Brake and Clutch Assembly simplifies installing a tandem outlet, single pushrod brake master cylinder in conjunction with a hydraulic clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged pedal arms in either 6.25:1 or 7.00:1 ratios. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. Will fit most tandem cylinders available with 3.25 horizontal bolt spacing. Pedal base has additional mount points for vertical mount 2.50” spacing tandem master cylinders using 5/16-18 studs (not supplied with pedal assembly). Clutch master cylinder mount is also a 2.50” vertical mount and will use most popular single outlet cylinders.
Wilwood Caliper-Dynapro 5.25in Mount 1.38in Pistons .38in Disc
$193.21The DynaPro Lug Mount (DP) forged billet caliper represents the newest generation of calipers available as an upgrade or replacement for applications previously using the long-standing Dynalite model series. DP calipers combine pure race technology with several new exclusive Wilwood performance enhancements. A sleek profile with superior strength and a fully detail machined finish provide the performance and looks for competition or show.