Out Of StockLowering Springs, Front, 1.2″ Drop, 200 Spring Rate, V6
$139.95These springs will lower the front of your Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Showing 577–592 of 1082 results
Out Of Stock
17-UP FORD FSD 2.5″ STAGE 1 SUSPENSION SYSTEM
2017-UP FORD SUPER DUTY 2.5" LIFT STAGE 1 SUSPENSION SYSTEM
- Fits 2017-UP F250 / F350 4WD applications
- Approximately 25% increased front wheel travel over stock
- ICON-engineered dual rate coil springs deliver exceptional vehicle control over varying terrain
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Shocks are fully rebuildable and revalvable
- Corrosion resistant anodized shock body with 5/8″ shaft (2.0 Aluminum Series shocks)
- Lifetime guarantee against coil spring breakage or sag
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
64031/214030 BEARING AND RET RING KIT
64031/214030 TRACK BAR BEARING AND RETAINING RING KIT
15-UP COLORADO TUBULAR UCA DJ KIT
2015-UP COLORADO TUBULAR UCA DELTA JOINT KIT
- ICON Delta Joint
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
07-UP FJ/03-UP 4RNR/03-UP GX BILLET UPPER TRAILING ARM KIT
2007-2014 FJ CRUISER/2003-UP 4RUNNER BILLET UPPER TRAILING ARM KIT
- CNC machined, billet aluminum construction
- Chemical etched, clear anodized finish for corrosion resistance
- On-vehicle adjustability using ICON’s pinch housing and double adjuster
- 3/4″ Rod End and Polyurethane Pivots, for excellent strength and longevity
- High Misalignment Spacers for Excellent Articulation
17-UP FORD F250/F350 4-5.5″ STAGE 6 COILOVER CONVERSION SYSTEM
2017-UP FORD F-250/F-350 4-5.5" LIFT STAGE 6 COILOVER CONVERSION SYSTEM
- Bolt-in system fits in OE coil bucket location
- Corrosion resistant anodized aluminum shock bodies with 7/8″ shafts (2.5 Aluminum Series shocks)
- Eibach coil springs guaranteed for life against sagging or breakage
- FK Rod End bearings for extended longevity and minimal deflection
- Ride height adjustable coilovers (4-5.5″)
- Increased wheel travel and ride quality over stock
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Shocks are fully rebuildable and revalveable
- Coilover conversion allows for addition of secondary shock
- Corrosion resistant CAD plated coilover shock body with 7/8″ shaft
Lowering Springs, Set Of 4, Performance, GT500
$259.95These springs will lower your GT500, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
20-UP GM 2500HD/3500 0-2″ STAGE 1 SUSPENSION SYSTEM (TUBULAR)
2020-UP GM 2500HD/3500 0-2" LIFT STAGE 1 SUSPENSION SYSTEM WITH TUBULAR UCA
- 0-2” Adjustable lift height over stock
- Vehicle specific tuned 2.5″ front and 2.0” rear shocks for superior shock damping and control
- Improved ride quality over stock with no change in towing capacity
- Wheel travel increase of 2″ over stock
- 100% Bolt-on system – no drilling, cutting, or welding necessary for install
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant anodized aluminum shock bodies
08-10 FORD F-250/F-350 4-6.5″ STAGE 7 COILOVER CONVERSION SYSTEM W/HOOP
$8,777.182008-2010 FORD F-250/F-350 4-6.5" LIFT STAGE 7 COILOVER CONVERSION SYSTEM WITH HOOP
Toyota Land Cruiser Knuckle Kit 91-97 FJ80 Both Sides Nitro Gear and Axle
$155.81Toyota Land Cruiser Knuckle Kit 91-97 FJ80 Both Sides Nitro Gear and Axle
12-15 HILUX 0-3″ STAGE 5 SUSPENSION SYSTEM W BILLET UCA
2012-2015 TOYOTA HILUX 0-3" LIFT STAGE 5 SUSPENSION SYSTEM WITH BILLET UCA
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear remote reservoir shocks for superior shock damping and control
- ICON CDCV equipped front coilovers for fully adjustable tuneability of your shocks
- Adjustable coilovers from 0-3″ of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8” shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear shock with 5/8″ shaft
- 100% Bolt-on system – no drilling, cutting, or welding necessary for install
PRO-LIFT-KIT Springs (Front Springs Only)
$180.00- Increased Ground Clearance.
- More Fender Clearance for Larger Wheels and Tires.
- Precision Engineered for Improved Off-Road Capability.
- Excellent On-Road Stability and Handling.
- Made in U.S.A.
07-18 GM 1500 1-3″ STAGE 5 SUSPENSION SYSTEM (SMALL TAPER)
2007-2018 GM 1500 1-3" LIFT STAGE 5 SUSPENSION SYSTEM (SMALL TAPER)
- FK rod end bearings for extended longevity and minimal deflection
- 2.5 Series piggyback reservoir rear shocks with 7/8″ shock shafts
- 100% Bolt-on system – no drilling, cutting, or welding necessary for install
- Fits 2WD and 4WD models
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- ICON CDCV equipped shocks for fully adjustable tuneability of your shocks
- Adjustable remote reservior coilovers from 1-3″ of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- High strength alloy CNC machined lower bar pin
17-UP FORD RAPTOR STAGE 4 SUSPENSION SYSTEM
2017-UP FORD RAPTOR STAGE 4 SUSPENSION SYSTEM
- 3.0 SERIES COILOVER SHOCK KIT
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Heavy duty CNC machined 1” shock shafts
- FK Rod End COM12 spherical bearings ensure maximum strength and durability
- CAD plated shock body with hard anodized piston and top cap
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
- BILLET ALUMINUM UPPER CONTROL ARM KIT
- CNC machined 6061 billet aluminum construction for light weight and exceptional strength
- Built-in caster correction improves front end geometry
- Patented Delta Joint (U.S. Patent No. 10,731,700) for maximum durability and noise-free operation
- Adjustable coilovers yield 1-3” of front lift height
- Camber and caster adjustability allows for precise wheel alignment
- ICON double adjuster sleeves for easy on-vehicle adjustment
- Vehicle specific taper pin provides OE-like fitment
- PTFE Lined 7/8” FK Rod Ends increase rigidity and improve response
- Built in o-ring sealed dust cover cap
- 3.0 SERIES 3-TUBE BYPASS SHOCK KIT
- 3-tube bypass design and “Bump Zone” technology provides multiple unique zones of damping and rebound control
- 50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions
- 12″ finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping
- Offset upper eyelet with patented ICON Anti-Wobble link for optimized shock mounting and packaging
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Easy-to-adjust detented knobs offer quick adjustability without the use of tools
- Specially engineered damped valve stops for quiet and precise operation without the loud “clicking” noise common with other brands
- Urethane shin guards help to protect the shock shaft & rod end from premature wear
- HYDRAULIC REAR BUMP STOP KIT
- Bolt-on installation does not require any fabrication or removal of the bed
- 2.5” travel hydraulic bump stop reduces rear end ‘kick’ and improves overall vehicle performance
- Velocity sensitive technology exponentially increases bottom-out resistance
- Vehicle specific bump stop tune provides smooth engagement and excellent ride quality
- 6061 billet aluminum crossmember increases chassis rigidity to improve overall vehicle dynamics
- Steel clamshell brackets strengthen the frame in critical areas to prevent damage from extreme off-road use
- Adjustable tension rods allow the frame to be preloaded to withstand torsional force during hard impacts
- Heavy duty 1.25” CNC machined nitro steel shafts
- Multi-stage CAD plated body for maximum corrosion resistance
- Replaceable noise-reducing striker pad
- Fully serviceable
- Superior low speed control reduces body roll and increases on-road stability
- MULTI-RATE LEAF SPRING KIT
- 3 user-adjustable spring rates for unique vehicle setups
- Triple military wrap front eyelet and rear half wrap for increased durability
- Rebound leaf reduces severe axle wrap
- Leaf separators and tip inserts reduce noise and friction while increasing ride comfort
- Direct bolt-in to OEM spring location makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Easy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups
- ICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel
- 10″ finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping
- Barreled coil spring design maximizes travel and provides more efficient packaging
01-UP GM HD/15-UP COLORADO/14-18 GM1500(LARGE TAPER) DELTA JOINT KIT
2001-UP GM HD/2015-UP COLORADO/2014-2018 GM1500(LARGE TAPER) DELTA JOINT KIT
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball
- Sealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris
- Metal on metal internals and a greasable design for maximum longevity and noise-free operation
- Capable of high angularity required for lifted applications
- Carburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly
- Pullout strength greater than comparable industry standard uniball
- Application specific taper pins for precise fit across a wide range of vehicles
- 5 Year ICON Limited Warranty (When used with ICON Vehicle Dynamics suspension components, visit www.iconvehicledynamics.com/deltajoint for more info)
19-UP FORD RANGER 0-3.5″ STAGE 3 SUSPENSION SYSTEM W TUBULAR UCA
2019-UP FORD RANGER 0-3.5" LIFT STAGE 3 SUSPENSION SYSTEM WITH TUBULAR UCA
- Height-adjustable coilovers provide a range of 0-3.5” of front lift height
- ICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- Delta Joint upper control arms carry ICON’s exclusive 5 year limited warranty
- Direct bolt-in design makes for a simple and straightforward installation
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
- Fits 2WD & 4WD applications
- Increased lift height allows for fitment of larger and more aggressive tires
- 35% increase in front wheel travel over stock
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- Corrosion resistant anodized shock body with 5/8? shaft (2.0 Aluminum Series shocks)
- Corrosion resistant CAD plated shock body with 7/8? shaft (2.5 Series coilovers)
- FK Rod End bearings provide extended longevity and minimal deflection
- Shocks are fully rebuildable and revalvable