Showing 7457–7472 of 36531 results
Canyon Offroad Truck and SUV Wheels 20×10 6 x 135/6 x 139.7 (5.5 Inch) -25 OffSet 106.2 CB Satin Black Machined Face Remington Off-Road
This filter features three layers of oil-free synthetic media and requires no oil during maintenance to provide maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity. This media is best suited for street use. Pro DRY S filters are easily recharged with aFe’s POWER CLEANER. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel T-bolt clamps and silicone couplings are used for strength and durability.
Super Stock Induction System w/ Pro DRY S Media Ford Mustang 15-20 L4-2.3L (t)
Ford Mustang 15-20 L4-2.3L (t)
MOD PCM & T2 9345 FOR 18 CHAL V6
2005-UP FORD SUPER DUTY 4WD 4"LIFT 2.5 VS REMOTE RESERVOIR CDCV BOLT IN CO CONVERSION KIT
Dana 60 30 Spline 4.56 P/L Complete Posi F/F Also Nitro Gear and Axle
Mercedes E-Class E 200 (2009-2016)
Dana 44 Mini Install Kit Jeep TJ Rubicon Nitro Gear and Axle
Jet Performance Upgrade Stage 2 Computer Chip; Requires Use Of 91 Octane Fuel/180 Degree Thermostat/Free Flow Exhaust.
Cat Back Exhaust System Single Rear Exit Black For 12-18 Jeep Wrangler/Rubicon JK 3.6L 2/4 Door MBRP
This Stage 2 air intake system produces 15 max horsepower, 20lbs. x ft. torque and out-flows the factory intake by 41%. Includes a massive air filter, and a one-piece heat shield that requires no assembly. This intake system also features a powder-coated black tube that replaces the stock intake tract and directs increased airflow with improved volumetric efficiency for maximum performance.
Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media Nissan Titan/Armada 04-15 V8-5.6L
Nissan Titan/Armada 04-15 V8-5.6L
Chevrolet Silverado 4.8L V8 (2007-2014)
Wilwood’s D52 Rear Caliper Kit offers a matching rear replacement option for our front D52 calipers. It is a direct bolt-on 2-piston replacement for the factory original single piston calipers used on many custom application rears. With the added benefit of smaller rear piston sizing (2.46 sq-inches of area) not normally available in OEM calipers, for correct front and rear bias. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line mounting. Calipers can be used with most wheels that clear the OE calipers. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations.
25 IN WIDE ICON TAGLINE LOGO WHITE DECAL
Weld W109 20X10 Retaliate 5X139.7 5X150 ET-18 BS4.75 Gloss Black MIL 110.2
6 Pak Chip Computer Chip
Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2” tall 360-degree radial flow air filter features a 4″ flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features a Takeda design inspired by import vehicles. Stainless-steel clamps and reinforced silicone couplings are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation. Included billet aluminum fittings allows stock connections to transfer over seamlessly.
Takeda Momentum Cold Air Intake System w/ Pro DRY S Media Hyundai i30N 17-21 L4-2.0L (t)
Hyundai i30N 17-21 L4-2.0L (t)
